Filter
Top Products
307-01-15 307-01-15Automatic Transaxle/Transmission
ASSEMBLY (Continued)
67. CAUTION: To avoid a ‘‘fall-out’’
condition of the strut from the screw during
assembly and function, the small ‘‘U’’ shape
notch should be toward the band/case side
and the large ‘‘U’’ shape notch toward the
main control side.
Position the strut in the transmission case.
1 Band/case side of the anchor (small U
notch).
2 Main control side of the anchor (large U
notch).
70. Loosely install the screw.
68. CAUTION: If the strut is installed
incorrectly, transmission damage will occur.
71. Install the overdrive apply strut.
Check to make sure that the intermediate band
anchor strut is installed in the correct
orientation to the case and adjustment screw.
69. CAUTION: If the strut is installed
incorrectly, transmission damage will occur.
Check to make sure that the overdrive band
anchor strut is installed in the correct
orientation to the case and adjustment screw.
2005 Mustang, 12/2004