Filter
Top Products
307-01-20 307-01-20Automatic Transaxle/Transmission
ASSEMBLY (Continued)
91. Tighten the center support screw. 94. Using the special tools, install the main control
valve body and loosely install the screws.
• Tighten to 11 Nm (8 lb-ft).
1 Install the short screw.
2 Install the screw with the larger head.
3 Install the remaining screws.
92. Using the special tools, carry out the air
pressure test procedure. For additional
information, refer to Special Testing Procedures
in this section.
95. Remove the special tools, and loosely install the
screw.
93. Install the special tools into the transmission
case.
2005 Mustang, 12/2004