Ford 307-01-1 Automobile User Manual


 
307-01-14 307-01-14Automatic Transaxle/Transmission
ASSEMBLY (Continued)
62. Install the overdrive brake drum and coast 65. NOTE: If the overdrive band is reused, it must
clutch drum assembly. be installed in the same position as when
removed.
NOTE: Make sure that the overdrive band
apply strut is aligned with the band notch.
NOTE: The new overdrive band is dark in
color. This is a normal condition of the band.
Hairline cracks in the band are also considered
normal. Do not install a new band based solely
on the color.
Install the overdrive band.
63. Install the overdrive band servo piston and
spring.
Lubricate the servo bore with clean
automatic transmission fluid.
66. Install the overdrive anchor strut.
64. Using the special tools, install the retaining
ring.
2005 Mustang, 12/2004