Filter
Top Products
307-01-2 307-01-2Automatic Transaxle/Transmission
ASSEMBLY (Continued)
Special Tool(s) Material
Compressor, Cushion Spring Item Specification
307-401
MERCON V Automatic MERCON V
Transmission Fluid
XT-5-QM
Multi-Purpose Grease ESR-M1C159-A
XG-4
1. Thoroughly clean the transmission case and
Aligner, Valve Body
extension housing in solvent and blow dry with
307-334 (T95L-70010-C)
compressed air.
2. Inspect the transmission case for the following:
• Stripped bolt hole threads
• Gasket and mating surfaces for burrs or
Alignment Pins, Transmission
nicks
Pump
• Obstructions to vent and fluid passages
307-399
• Cracks or warpage
Aligner, Flex Plate
307-403
Air Test Plate
307-433-01, 307-433-2,
307-433-3
3. Inspect the extension housing for cracks, burrs
or warpage.
Installer, Drive Pinion flange
205-479
Installer, Output Shaft Flange
307-404
2005 Mustang, 12/2004