Filter
Top Products
XDVDN9131 OPERATION
67
Bluetooth
®
- Setup Menu (Optional)
Pairing
Search For Device
Step 1
Step 2
Device List
Notes
Connect
Auto Answer
Bluetooth MIC
Before you can use a Bluetooth device to make hands-free calls or stream
audio, it must be authenticated. This is also referred to as "pairing" a device.
Note: Please make sure that Bluetooth is activated on your mobile device before
you begin the pairing process. Refer to the owner's manual of your mobile
device for more details.
Access Bluetooth setup menu, make sure Bluetooth is set to On and press
Search - Yes to begin the pairing process. The head unit will display the device
name "DUAL BT" and the Pin "1234" and will search for any nearby Bluetooth
device. If you have more than one Bluetooth device, please make sure only the
device you want to connect to is powered on. Refer to the owner's manual of
your mobile device for more details on searching for Bluetooth devices.
When prompted by your mobile device, enter 1234 for the PIN or pass code. The
device name of the head unit will show up as "DUAL BT". During the pairing
process, the Bluetooth icon will flash. After the pairing process has completed,
and the device is connected, the Bluetooth icon will illuminate steady.
To connect to a previously connected device, press the current device name.
Any previously connected devices that are in range will be listed by their device
name. Press the desired device name to disconnect from the current device and
connect to the new device.
This head unit can remember the last 8 paired mobile devices. It is only possible
to connect to one Bluetooth mobile device at a time.
When pairing to more than 8 mobile devices, the head unit will delete the device
that was used the least. The mobile device that is last connected will always be
remembered by default.
It is possible to search for previously connected Bluetooth devices from this
head unit. It may be possible to search for this head unit from other Bluetooth
devices. It is also possible to disconnect this head unit from other devices.
The head unit will automatically connect to the last connected device when the
Connect feature is set to Auto. If the Connect feature is set to Manual, the head
unit will not automatically connect to any device. Set the Connect feature to
Manual when you do not want to connect to any Bluetooth device.
The head unit will automatically answer incoming calls when the Auto Answer
feature is set to On. If the Auto Answer feature is set to Off, the Talk button must
be pressed to answer an incoming call.
The head unit includes a built-in microphone for hands-free calling. As an
option, the included external microphone can be used. Set the Bluetooth MIC to
External to use the external microphone. Refer to page 7 for details on installing
the microphone.
67