Filter
Top Products
64
Auxiliary Inputs - A/V 1 & A/V 2
Rear Camera Operation - (Optional)
XDVDN9131 OPERATION
Connect an optional audio/video source into the 3.5mm (front panel) input.
Select AV/1 from the Main Menu to listen to audio.
Engage parking brake as described on page 32 to watch video.
Adjust volume on the external audio source as needed (if connected to the
headphone output).
Connect an optional audio/video source to the Auxiliary Input 2 (Red/White/Yellow
RCA connectors). Refer to page 6 for details.
Select AV/2 from the Main Menu to listen to audio.
Engage parking brake as described on page 32 to watch video.
Connect an optional rear camera to the Camera Input (Black RCA connector).
Refer to page 6 for details.
The camera image can be reversed (if needed) in the Main Setup Menu. Refer to
page 19 for details.
Manual selection - Touch CAMERA icon from the Main Menu to select camera
mode. Touch the top left area on the screen to exit camera mode.
The unit will automatically select camera mode when connected to the reverse
lamp circuitry. Refer to page 6 for details. Anytime the reverse gear is selected,
the panel will open and select camera mode automatically.
Using A/V1 Input
Using A/V2 Input
Using Rear Camera
Auto Selection