Filter
Top Products
42 © 2006 Directed Electronics—all rights reserved
To exit the learn routine:
The learn routine will be exited if any of the following occurs:
1. Close the open door.
2. Turn the ignition on.
3. There is no activity for longer than 15 seconds.
4. The Valet/Program switch is pressed too many times.
feature menus
The default settings are indicated in bold type. Features that have additional settings that can be programmed
using the Bitwriter® are indicated with an asterisk (*).
FEATURE NUMBER ONE-CHIRP SETTING (DEFAULT) TWO-CHIRP SETTING
1-1 Active arming Passive arming
1-2 Arm/disarm chirps on Arm/disarm chirps off
1-3 Ignition lock ON Ignition lock OFF
1-4 Ignition unlock ON Ignition unlock OFF
1-5 Active locking only Passive locking
1-6 Panic with ignition on No panic with ignition on
1-7 0.8 second door lock pulses (1) 3.5 (2), 0.4 (3) seconds
1-8 Forced passive arming on Forced passive arming off
1-9 Automatic engine disable on Automatic engine disable off
1-10 Armed When Driving (AWD) on AWD off
1-11 Code Hopping on Code Hopping off
1-12 Horn Output Pulsed Constant
1-13 Horn function Full Alarm Only (1) Siren function - chirp length
20mS (2)/30mS (3)/40mS (4)/50mS (5)
1-14 Comfort Closure ON Comfort Closure OFF
NOTE: The numbers in parentheses indicate the number of times the siren will chirp and the
LED will flash.
menu #1 - basic features