Filter
Top Products
© 2006 Directed Electronics—all rights reserved 41
5. Program the Feature. While holding the Valet/Program switch, you can toggle the feature
on and off using the remote transmitter. Pressing the button that arms the system will
select the one chirp or default setting. Pressing the button that disarms the system (or the
Channel Two button when in the single button arm/disarm configuration) will select the
two chirp setting.
Note: Some features have more than two possible settings. Pressing will select the one chirp
setting, pressing will toggle through the two-chirp and higher settings.)
6. Release. Release the Valet/Program switch.
Once a feature is programmed:
■ Other features can be programmed within the same menu.
■ Another menu can be selected.
■ The learn routine can be exited if programming is complete.
To access another feature in the same menu:
1. Press and release the Valet/Program switch the number of times necessary to advance from the feature you
just programmed to the next one you want to program.
2. Then press the Valet/Program switch once more and HOLD it.
For example, if you just programmed the third feature in the menu and you would like to program the seventh
feature in the menu, you would press and release the Valet/Program switch four times and then press it once
more and HOLD it. The siren would chirp seven times to confirm access to the seventh feature.
To select another menu:
1. Press and hold the Valet/Program switch.
2. After three seconds, the unit will advance to the next menu and the siren will chirp, indicating which menu
has been accessed.
For example, if you just programmed some features in the first menu and you want to program a feature in the
third menu, press and HOLD the Valet/Program switch. After three seconds, the siren chirps twice indicating
access to the second menu. Continue to HOLD the button and three seconds later the siren will chirp three times
indicating access to the third menu. Features in the third menu are then programmable following steps 4 through
6 of the System Features Learn Routine procedure.