Filter
Top Products
40 © 2006 Directed Electronics—all rights reserved
system features learn routine
The System Features Learn Routine dictates how the unit operates. It is possible to access and change any of
the feature settings using the Valet/program switch. However, this process can be greatly simplified by using the
Bitwriter®. Any of the settings can be changed and then assigned to one of up to four transmitters. This feature
is called Owner Recognition. Each time that particular transmitter is used to disarm the system, the assigned
feature settings will be recalled. Owner Recognition is only possible when programming the unit via the
Bitwriter®.
If programming with the Bitwriter®, the learn routine can be locked or unlocked. If the learn routine has
previously been locked, it must be unlocked before proceeding with reprogramming the learn routine. This
must be done by using either Bitwriter® - this cannot be done manually with the Valet switch. If the learn routine
is locked, features cannot be changed.
To enter the System Features Learn Routine™:
1. Open a door. (The GREEN wire, H1/8, or the VIOLET, H1/6 must be connected.)
2. Ignition. Turn the ignition on, then back off. (The heavy gauge PINK wire of the relay
satellite must be connected.)
3. Select a Menu. Press and HOLD the Valet/Program switch. (The Valet/Program switch must
be plugged into the blue port.) After three seconds the siren will chirp once indicating
entry to the Basic Features Menu. If this is the menu you wish to access, release the button
and go on to Step 4. If the button is not released, you will jump to the next menu and the
siren will chirp twice. There are three possible menus. Once you have selected the desired
menu, release the Valet/Program switch.
4. Select a Feature. Press and release the Valet/Program switch the number of times corre-
sponding to the feature you wish to change. For example, to access the third feature, press
and release 3 times. Then press the button once more and HOLD it. The siren will chirp the
number of times equal to the feature you have accessed.