Directed Electronics 990 Automobile Parts User Manual


 
36 © 2006 Directed Electronics—all rights reserved
Learn Routine will be exited if:
Door is closed.
Ignition is turned off.
Program switch is pressed too many times.
More than 15 seconds between steps.
transmitter configurations
The transmitter can be programmed with the standard or single button arm/disarm configurations by using the
Auto Learn functions in the Transmitter/Receiver Learn Routine.
A remote that uses the standard configuration operates similarly to many factory keyless entry remotes. A stan-
dard configuration transmitter allows arming, disarming, and Panic Mode activation with separate buttons. When
programmed for standard configuration, the transmitter buttons are assigned to the following functions:
.................................operates...........................Arm/Lock,
Panic ON/Panic OFF
.................................operates...........................Disarm/Panic OFF
.................................operates...........................Start
.................................operates...........................Channel 2—trunk
release
and ................operate............................Timer Mode
and ................operate ..........................Short Run/Turbo
timer
and ................operate............................Channel 4
and ................operate............................Channel 5
standard configuration