Filter
Top Products
Auxiliary outputs (options)
This system also supplies outputs that can control convenience options such as remote control
trunk release and window automation. Consult your dealer for available options for your system.
Channel 2 Trunk release: When connected, pressing
for 1.5 seconds will remotely release the
vehicle trunk lid.
Channel 3 auxiliary output: When connected, pressing
and will immediately activate this
output to control an additional convenience option.
Channel 4 auxiliary output: When connected, pressing
and will immediately activate this
output to control an additional convenience option.
Channel 5 auxiliary output: When connected, pressing
and will immediately activate this
output to control an additional convenience option.
Channel 6 auxiliary output: When connected, pressing
and will immediately activate this
output to control an additional convenience option.
The remote will respond with a page notification consisting of one long beep and for 4-seconds
displays the channel number on the LCD screen. This occurs at the remote after the system has
received the command to activate any of the Auxiliary outputs.
Shock sensor adjustment
TO ENTER SHOCK SENSOR ADJUSTMENT MODE:
NOTE: The system must be disarmed, doors
and other protected entries (zones 1 and 6) must
be closed, and ignition (zone 5) must be off.
1. Press and hold and buttons for 6-seconds.
2. The siren will emit one long chirp and LCD remote will emit 1 long beep when the
buttons on the remote are released (or 1 vibrate, or 1 long beep with vibrate) to
indicate entry into shock adjustment mode.
3. The word “SENSOR” on the LCD transmitter, above the adjustment indicator bar
, will flash for the duration of shock adjustment mode. The sensor bar
indicator will display the current sensor sensitivity setting. Increased sensitivity is
indicated as the bar fills to the right.
14 © 2006 Astroflex Electronics - All rights reserved