Directed Audio VSS-204TW Automobile Alarm User Manual


 
(This is the factory setting.)
SILENT MODE
To temporarily turn off the arm or disarm chirps, use Silent Mode™. Simply press for less than
one second before arming or disarming, and the confirmation chirp(s) will be eliminated for that
one operation only. If you want the arm/disarm chirps turned off permanently, your dealer can
do this for you.
NOTE: The Warn Away
®
response to lighter impacts is bypassed if the
system is armed using Silent Mode. This ensures that no chirps will be
emitted by the siren in an area you want chirp-free. The system is still
fully capable of triggering. Only the Warn Away
®
response is bypassed.
The LCD remote responds with the normal arm/disarm notifications in silent mode. (If the remote
has beeps programmed On, the remote will beep.)
PANIC MODE
LCD remote
If you are threatened in or near your vehicle, you can attract attention by triggering the system
with your LCD remote. Just press
for 2 seconds or press or
buttons for five seconds,
and you will enter Panic Mode. The siren will sound and the parking lights will flash for the
programmed siren duration. To stop Panic Mode at any time, repeat the command but hold on
the button for only one second.
The LCD remote responds with one beep and display of the
icon upon entering Panic Mode.
3-buttons remote
If you are threatened in or near your vehicle, you can attract attention by triggering the system
with your 3 buttons remote. Just press
or
buttons for five seconds, and you will enter
Panic Mode. The siren will sound and the parking lights will flash for the programmed siren
duration. To stop Panic Mode at any time, repeat the command but hold on the button for only
one second.
The panic mode can also be used to locate the vehicle.
11 © 2006 Astroflex Electronics - All rights reserved