Filter
Top Products
WARNING: Improper installation,
operation, or servicing may result in
equipment damage or personal
injury.
This equipment should only be installed,
adjusted, and serviced by qualified technical
personnel who are familiar with the construc-
tion, operation, and potential hazards of this
type of machine.
All wiring, disconnects, and fuses should be
installed by qualified electrical technicians in
accordance with electrical codes in your
region. Always maintain a safe ground. Do not
operate the equipment at power levels other
than what is specified on the machine serial
plate.
INTRODUCTION 1-3
We design equipment with the user’s safety in mind. You can
avoid the potential hazards identified on this machine by fol-
lowing the procedures outlined below and elsewhere in the
User Guide.
ATTENTION:
READ THIS SO NO
ONE GETS HURT
UGR004/1200 Moducon Belt Conveyor
WARNING: Disconnect power
sources to prevent injury from
unexpected energization or startup.
This product has a moving belt. To prevent
possible injury from unexpected startup, always
disconnect and lockout the main power source
before performing maintenance or trouble-
shooting procedures on this product.
WARNING: Electrical Shock Hazard
This device must be properly grounded.
Improper grounding can result in severe
personal injury and erratic machine operation.
Do not operate the equipment at power levels
other than what is specified on the machine
serial plate.