Filter
Top Products
UGR004/1200 Moducon Belt Conveyor
DESCRIPTION 2-5
CONVEYOR
OPTIONS
Available options include:
● Belt types
Open belt - This belt has a 1-inch pitch
with an open design that allows faster
parts cooling. You can increase the cool-
ing rate with optional fans mounted
beneath the belt. Belt widths start at 3
inches (76 mm) and increase in 3-inch increments to 36
inches (914 mm). All belt designs can be fitted with 1-, 2-
or 3-inch flights. The open belt is available in polypropy-
lene, polyamide (nylon) and acetal. Choose color: blue,
gray, red, black or white.
Side flexing belt - this 1-inch pitch
side flexing belt has a turning inside
radius of 2.3 times the belt width. This
belt can be fitted with flights and rub-
ber gripper sections. The side flexing belt material is
available in polypropylene, polyamide (nylon) and acetal.
Choose color: blue, gray, red, black or white.
●
Flights
Flights set at regular intervals in the belt
help hold the part in place on an incline or
decline of the conveyor. Optional flights
are available in heights of 1, 2 or 3 inches.
The application determines the distance between flights.
●
Side flexing units
Optional side flexing modules with a
90
°
bend can be added to flat or inclined
conveyors.
● Gripper sections
Optional grippers help hold the part in
place as it moves along the conveyor. The
rubber grip face is available on the side
flexing belt.
●
Bed plates
When conveying heavy products — weighing 11 lb
(5 kg) or more — bed plates can be added to provide
more support.
●
Stainless steel belt connector pins
When conveying heavy products, the optional stainless
steel connector pins provide better support than standard
plastic pins. Choose when the conveyor may be exposed
to moisture or water.