Filter
Top Products
The Belt Conveyor Moducon series models need regular,
scheduled maintenance for peak performance.
Use the maintenance schedule on the following page as a
guide. You may need to shorten the time of the maintenance
schedule, depending on how often you use the conveyor.
Follow all safety procedures when working on the equipment.
PREVENTIVE
MAINTENANCE
SCHEDULE
Moducon Belt Conveyor UGR004/1200
5-2 MAINTENANCE
WARNING: Improper installation,
operation, or servicing may result in
equipment damage or personal
injury.
This equipment should be installed, adjusted,
and serviced only by qualified technical per-
sonnel who are familiar with the construction,
operation, and potential hazards of this type of
machine.
All wiring, disconnects, and fuses should be
installed and maintained by qualified electrical
technicians in accordance with electrical codes
in your region.
WARNING: Disconnect power
sources to prevent injury from
unexpected energization or startup.
This product has a moving belt. To prevent
possible injury from unexpected startup, always
disconnect and lockout the main power source
before performing maintenance or trouble-
shooting procedures on this product.
WARNING: Electrical Shock Hazard
This device must be properly grounded.
Improper grounding can result in severe
personal injury and erratic machine operation.
Do not operate the equipment at power levels
other than what is specified on the machine
serial plate.