Filter
Top Products
UGR004/1200 Moducon Belt Conveyor
INSTALLATION 3-5
CONNECTING
MAIN POWER
WARNING: Disconnect power
sources to prevent injury from
unexpected energization or startup.
This product has a moving belt. To prevent
possible injury from unexpected startup, always
disconnect and lockout the main power source
before performing maintenance or trouble-
shooting procedures on this product.
WARNING: Improper installation,
operation, or servicing may result in
equipment damage or personal
injury.
This equipment should only be installed,
adjusted, and serviced by qualified technical
personnel who are familiar with the construc-
tion, operation, and potential hazards of this
type of machine.
All wiring, disconnects, and fuses should be
installed by qualified electrical technicians in
accordance with electrical codes in your
region. Always maintain a safe ground. Do not
operate the equipment at power levels other
than what is specified on the machine serial
tag and data plate.
Verify that the control button is set to Standby.
Plug the conveyor belt power cord into the
main power source supplying 100-115C/1 phase/50-60Hz.
1
2
Control button