Filter
Top Products
The Moducon Belt Conveyor is shipped already assembled.
Carefully unpack the conveyor and its
components.
Remove all packing material, protective paper,
tape, and plastic. Compare contents to the shipping papers
to ensure that you have all the parts.
Carefully inspect all components to make sure
no damage occurred during shipping. If any damage is
found, notify the shipping agent immediately. Check all
wire terminal connections, bolts, and any other electrical
connections, which may have come loose during ship-
ping.
Record serial numbers and specifications
in the blanks provided on the back of the User Guide's
title page. This information will be helpful if you ever
need service or parts.
Proceed to
P
REPARING FOR INSTALLATION.
UNPACKING
THE
BOXES
Moducon Belt Conveyor UGR004/1200
3-2 INSTALLATION
1
2
3
4
WARNING: Improper installation,
operation, or servicing may result in
equipment damage or personal
injury.
This equipment should only be installed,
adjusted, and serviced by qualified technical
personnel who are familiar with the construc-
tion, operation, and potential hazards of this
type of machine.
All wiring, disconnects, and fuses should be
installed by qualified electrical technicians in
accordance with electrical codes in your
region. Always maintain a safe ground. Do not
operate the equipment at power levels other
than what is specified on the machine serial
tag and data plate.