Filter
Top Products
The belt conveyor control allows you to start, stop and control
the speed of the belt. Lights indicate when power is being
supplied to the unit and when an alarm condition exists.
CONTROL
FEATURES
Moducon Belt Conveyor UGR004/1200
4-2 OPERATION
S
TARTING THE
CONVEYOR
Make sure the conveyor is level and locked.
Adjust leveling feet as needed. Lock the optional casters.
Inspect the belt and mounting hardware.
Tighten any loose fittings or hardware. Replace any belt
links or flights that are worn, cracked or fractured.
Make sure the control button
in the Standby position.
Turn the speed control dial to Low.
Apply power to the conveyor.
Plug the power cord into the power source.
Slide the control button to the
Run position.
Adjust the belt speed as needed.
Turn the speed control dial clockwise to increase speed.
Turn the dial counterclockwise to decrease speed.
Indicator lights
display power on and
alarm conditions.
Dial
Turn clockwise to increase
belt speed. Turn counter-
clockwise to slow belt speed.
Control button
Slide left to Run position to
start belt movement.
Slide right to Standby to stop
the belt.
NOTE: The belt does not
move, but power to the the
conveyor is still on when the
unit is in Standby.
2
3
1
5
6
4
7