Filter
Top Products
You can avoid most problems by following the recommended
installation, operation and maintenance procedures outlined in
this User Guide. If a problem should occur:
❒ Find any wiring, parts, and assembly diagrams that
were shipped with your equipment. These are the best
reference for correcting a problem. The diagrams will note
any custom features or options not covered in this User
Guide.
❒ Verify that you have all instructional materials related
to the conveyor and to any other equipment connected
to the system. Additional details about troubleshooting and
repairing specific components are found in these materials.
BEFORE
BEGINNING
Moducon Belt Conveyor UGR004/1200
6-2 TROUBLESHOOTING
A FEW WORDS
OF
CAUTION
WARNING: Improper installation,
operation, or servicing may result in
equipment damage or personal
injury.
This equipment should be installed, adjusted,
and serviced only by qualified technical per-
sonnel who are familiar with the construction,
operation, and potential hazards of this type of
machine.
All wiring, disconnects, and fuses should be
installed and maintained by qualified electrical
technicians in accordance with electrical codes
in your region.
WARNING: Disconnect power
sources to prevent injury from
unexpected energization or startup.
This product has a moving belt. To prevent
possible injury from unexpected startup, always
disconnect and lockout the main power source
before performing maintenance or trouble-
shooting procedures on this product.
WARNING: Electrical Shock Hazard
This device must be properly grounded.
Improper grounding can result in severe
personal injury and erratic machine operation.
Do not operate the equipment at power levels
other than what is specified on the machine
serial plate.