Filter
Top Products
Moducon Belt Conveyor UGR004/1200
3-4 INSTALLATION
S
ETTING THE
H
EIGHT
POSITIONING
THE
CONVEYOR
Place the conveyor where it is needed, then verify that the
conveyor is level. If the conveyor is not level, adjust the
leveling devices on the legs. If your conveyor has the optional
casters, lock the casters in position.
Measure from the floor to the top of the conveyor belt. Adjust
the height of the belt by loosening the bolts on the legs and
sliding the conveyor up or down. Be sure to support the
conveyor while adjusting the bolts. Do not move the height
above the height of the leg frame.
Leg frame
Bolts
Belt
Leg frame
Side wall
Leg frame
Height adjustment
bolt above the belt
Belt
Leveling device
Height adjustment,
bolt below the belt