Filter
Top Products
AIR DELIVERY — 558D036-150 VERTICAL DISCHARGE UNITS (cont)
558D060 (5 TON)
Airflow
(Cfm)
Standard Direct-Drive Motor
Low Speed Medium Speed High Speed
208 v 230, 460, 575 v 208 v 230, 460, 575 v 208 v 230, 460, 575 v
ESP Bhp Watts ESP Bhp Watts ESP Bhp Watts ESP Bhp Watts ESP Bhp Watts ESP Bhp Watts
1500 0.88 0.67 750 1.20 0.71 791 1.19 0.70 782 1.36 0.76 845 1.38 0.79 875 1.44 0.85 949
1600 0.68 0.70 780 1.04 0.74 824 1.04 0.74 821 1.22 0.79 883 1.25 0.82 913 1.33 0.89 988
1700 0.51 0.73 810 0.89 0.77 857 0.89 0.77 861 1.09 0.83 921 1.13 0.85 950 1.22 0.92 1027
1800 0.35 0.75 839 0.73 0.80 891 0.74 0.81 900 0.96 0.86 959 1.00 0.89 988 1.11 0.96 1066
1900 0.26 0.78 873 0.58 0.83 924 0.59 0.84 940 0.86 0.90 997 0.88 0.92 1025 1.00 0.99 1105
2000 0.18 0.81 905 0.42 0.86 957 0.44 0.88 979 0.73 0.93 1035 0.78 0.95 1063 0.92 1.03 1144
2100 0.08 0.84 940 0.27 0.89 990 0.29 0.91 1018 0.59 0.96 1073 0.63 0.99 1101 0.81 1.06 1183
2200 — — — 0.19 0.92 1023 0.19 0.93 1035 0.46 1.00 1111 0.49 1.02 1138 0.69 1.10 1222
2300 — — — 0.11 0.95 1056 0.11 0.97 1076 0.34 1.03 1149 0.41 1.06 1176 0.59 1.13 1261
2400 — — — 0.03 0.98 1096 0.04 1.00 1113 0.19 1.07 1187 0.22 1.09 1213 0.43 1.17 1300
2500 — — — — — — — — — 0.09 1.10 1225 0.12 1.12 1251 0.34 1.20 1340
LEGEND
Bhp — Brake Horsepower Input to Fan
ESP — External Static Pressure (in. wg)
FIOP — Factory-Installed Option
Watts — Input Watts to Motor
NOTES:
1. Values include losses for filters, unit casing, and wet coils. See
page 47 for accessory/FIOP static pressure information.
2. Extensivemotor and electrical testing on these units ensures that the
full range of the motor can be utilized with confidence. Using
your fan motors up to the wattage ratings shown will not result in nui-
sance tripping or premature motor failure. Unit warranty will not be
affected. For additional information on motor performance, refer to
Evaporator-Fan Motor Performance table on page 62.
3. Use of a field-supplied motor may affect wire sizing. Contact your lo-
cal representative for details.
4. Minimum allowable cfm is 300 cfm/ton.
558D060 (5 TON)
Airflow
(Cfm)
Alternate Belt-Drive Motor
External Static Pressure (in. wg)
0.1 0.2 0.4 0.6 0.8
Rpm Bhp Watts Rpm Bhp Watts Rpm Bhp Watts Rpm Bhp Watts Rpm Bhp Watts
1500 730 0.34 347 789 0.40 409 896 0.53 542 990 0.67 685 1072 0.83 848
1600 770 0.40 409 826 0.46 470 931 0.61 623 1020 0.75 766 1101 0.91 930
1700 811 0.47 480 865 0.54 552 966 0.69 705 1051 0.84 858 1133 1.01 1032
1800 852 0.55 562 905 0.62 634 1002 0.78 797 1084 0.93 950 1163 1.10 1124
1900 894 0.54 552 945 0.72 736 1037 0.88 899 1119 1.04 1063 1194 1.21 1237
2000 936 0.74 756 984 0.82 838 1072 0.98 1001 1154 1.16 1185 1226 1.33 1359
2100 978 0.85 869 1024 0.93 950 1108 1.10 1124 1192 1.29 1318 1259 1.47 1502
2200 1021 0.97 991 1064 1.05 1073 1145 1.22 1247 1225 1.43 1461 1294 1.62 1656
2300 1064 1.10 1124 1104 1.18 1206 1183 1.36 1390 1260 1.57 1604 1330 1.78 1819
2400 1107 1.24 1267 1145 1.32 1349 1222 1.45 1482 1296 1.73 1768 1365 1.94 1983
2500 1150 1.39 1420 1186 1.48 1512 1262 1.68 1717 1331 1.80 1921 1400 2.12 2166
558D060 (5 TON) (cont)
Airflow
(Cfm)
Alternate Belt-Drive Motor
External Static Pressure (in. wg)
1.0 1.2 1.4 1.6 1.8
Rpm Bhp Watts Rpm Bhp Watts Rpm Bhp Watts Rpm Bhp Watts Rpm Bhp Watts
1500 1153 1.00 1022 1221 1.17 1196 1256 1.30 1328 1280 1.32 1349 1320 1.22 1400
1600 1178 1.09 1114 1252 1.27 1298 1311 1.45 1482 1340 1.58 1615 1380 1.61 1645
1700 1205 1.18 1206 1278 1.37 1400 1345 1.57 1604 1397 1.76 1799 1424 1.89 1931
1800 1235 1.29 1318 1303 1.48 1512 1371 1.69 1727 1433 1.90 1942 1480 2.09 2136
1900 1266 1.40 1431 1330 1.59 1625 1396 1.80 1850 1460 2.03 2074 1517 2.25 2299
2000 1297 1.53 1564 1362 1.73 1768 1422 1.94 1983 1485 2.16 2207 1544 2.40 2453
2100 1327 1.66 1696 1393 1.80 1911 1452 2.08 2126 1510 2.31 2361 1569 2.55 2606
2200 1359 1.80 1850 1423 2.02 2064 1483 2.24 2289 1538 2.46 2514 1595 2.71 2769
2300 1392 1.97 2013 1454 2.18 2228 1515 2.41 2463 1569 2.64 2698 1622 2.88 2943
2400 1426 2.15 2197 1485 2.36 2412 1544 2.59 2647 1601 2.84 2902 1652 3.07 3137
2500 1461 2.34 2391 1518 2.55 2606 1575 2.78 2841 1631 3.03 3096 1684 3.28 3352
LEGEND
Bhp — Brake Horsepower Input to Fan
FIOP — Factory-Installed Option
Watts — Input Watts to Motor
NOTES:
1. Boldface indicates a field-supplied drive is required. (See Note 7.)
2. indicates field-supplied motor and drive are required.
3.
indicates maximum usable bhp/watts.
4. Maximum usable watts input is 1921 and maximum continuous bhp
is 1.80. Extensive motor and electricaltesting onthese unitsensures
that the full range of the motor can be utilized with confidence. Using
your fan motors up to the wattage ratings shown will not result in nui-
sance tripping or premature motor failure. Unit warranty will not be
affected. For additional information on motor performance, refer to
Evaporator-Fan Motor Performance table on page 62.
5. Values include losses for filters, unit casing, and wet coils. See
page 47 for accessory/FIOP static pressure information.
6. Use of a field-supplied motor may affect wire sizing. Contact your lo-
cal representative for details.
7. Motor drive range: 900 to 1300 rpm. All other rpms require field-
supplied drive.
8. Interpolation is permissible. Do not extrapolate.
9. Minimum allowable cfm is 300 cfm/ton.
28