Filter
Top Products
25
To install the car kit:
1. Attach the cradle to the gooseneck (1).
2. Attached the cupule to the windowshield inside your car (3).
3. Press the lever (4) to secure the cupule on the windowshield surface.
Note: Rise the lever (2) to release the cupule from the windowshield.
4. Adjust the angle of the gooseneck and secure it by fasten screwcap A.
5. Adjust the angle of the cradle and secure it by fasten screwcap B.
6. Carefully put the device into the cradle (5).
screwcap A
screwcap B
1.6 Installing the car kit