132 ProMark2 User’s Guide
Survey Status – Kinematic Screen
The Survey Status – Kinematic screen, Figure 4.23, provides important status information
regarding receiver operation and the current data collection session. All important information
about the survey can be viewed from this screen. Depend on the
Survey Status screen to
determine if data is being logged, to start point attribute logging, to determine how much time
has elapsed since the point attribute logging was started, guide you on the quality of the data
being collected, and provide you with receiver operational status information such as battery
life and remaining memory. The
Survey Status screen is accessed by pressing the Nav/Surv
button when viewing the
Satellite Status screen; the Nav/Surv button and the ESC button
toggle back and forth between the
Survey Status and Satellite Status screens. Table 4.18
describes the screen parameters.
Figure 4.23 Survey Status - Kinematic Screen
Table 4.18 Survey Status - Kinematic Screen Parameters
Parameter Description
Site ID The Site ID field displays the current site ID assigned for this data session. The field
is display only, it can not be edited.
Elapsed The Elapsed field displays the amount of time since point attribute data storage began
for the current observation.
Note: The Remain time will be displayed instead of Elapsed during a point
initialization (Initialize field set to Bar or Known).
# Sats The # Sats field displays the current number of healthy satellites above 10 degrees
elevation being logged into memory.
