Thales Navigation CGRS Manual

A SERVICE OF

next previous

Surveying with ProMark2 93

Surveying with ProMark2

Kinematic Rover

There are two rover modes available—Stop-and-go and Kinematic. The mode must be

selected prior to starting the survey. The following steps refer to the setup for the kinematic

rover mode of operation.

1. Turn on the ProMark2 receiver by pressing the red on/off button on the face of the

receiver. The opening screen appears, followed by the

Mode screen, Figure 3.55.

2. Select

Survey from the Mode screen.

With

Survey highlighted, press Enter to bring up the Survey screen, Figure 3.56.

Figure 3.55 Mode Screen