118 ProMark2 User’s Guide
Site Description Screen
The Site Description screen, Figure 4.11, can be accessed from the Point Attribute screen
when the
Site Description field is highlighted and the Enter key is pressed.
The
Site Description screen lets you select a descriptor from the descriptor list, enter a new
descriptor, edit an existing descriptor, and delete a descriptor. The descriptor can be 20
characters in length. The site description table allows up to 16 site descriptors on the list. The
default value <Empty> will always be available in the list. <Empty> will allow you to set the
site descriptor field to an empty string. Table 4.8 describes the screen parameters.
Figure 4.11 Site Descriptor Screen
Table 4.8 Site Descriptor Screen Parameters
Parameter Description
Save Saves the data entry, sets the highlighted descriptor in the Site Descriptor field in the
Point Attribute screen, and returns the program to the Point Attribute screen.
New Calls the Description Edit screen where you can enter a descriptor up to 20 characters
in length. This field is no longer selectable when 16 descriptors are in the table.
Edit Calls the Description Edit screen where you can modify the highlighted descriptor.
Delete Deletes the highlighted descriptor. Descriptors can only be deleted one at a time.
Note: Press the ESC button to cancel changes and return to the Point Attribute screen. The table is saved
after a power cycle with all entries in the Site Description screen that have been saved. Save button has been
pressed.
