A SERVICE OF

logo

Open as PDF
next previous
Screen Descriptions 111
Screen Descriptions
Survey Mode Screen
The Survey Mode screen, Figure 4.6, lets you set the type of survey you wish to perform.
Table 4.3 describes the screen parameters.
Figure 4.6 Survey Mode Screen
Table 4.3 Survey Mode Screen Parameters
Parameter Description
Survey Mode Lets you set the survey mode. Static, Stop-and-Go, and Kinematic are the available
options. Default is Static.
Note: The survey mode selected will be saved after a power cycle.
Save Saves settings.
Note: The Survey Mode cannot be changed after selecting Collect Data in the Survey Menu. The receiver will perform
only the survey mode that is currently set. The receiver must be power cycled to change the survey mode.