110 ProMark2 User’s Guide
Survey Menu Screen
The Survey Menu screen, Figure 4.5, gives you control over receiver operational parameters,
survey data collection parameters, and receiver raw data files. All functions found in the
Survey Menu can be utilized at any time before or during survey data collection. The Survey
Menu
is accessed by either selecting Setup from the Survey screen, or by pressing the Menu
button from the
Survey Status screen or the Satellite Status screen. Table 4.2 describes the
selections in the
Survey Menu.
Figure 4.5 Survey Menu Screen
Table 4.2 Survey Menu Screen Selections
Parameter Description
Survey Mode Calls the Survey Mode screen, page 111.
Point Attribute Calls the Point Attribute screen, page 111.
Recording Interval Calls the Recording Interval screen, page 120.
Antenna Calls the Antenna screen, page 122
File Manager Calls the File Manager screen, page 123.
Units Calls the Unit of Measure screen, page 125.
Receiver ID Calls the Receiver ID screen, page 126.
Contrast Calls the Contrast screen, page 127.
