A SERVICE OF

logo

Open as PDF
next previous
100 Promark2 User’s Guide
Figure 3.63.
The
Unit of Measure screen lets you select the units of measure in which you wish to
enter antenna height information. Also, the selected units determine the units of
measure the Observation Timer utilizes.
Press
Enter to access the selection list of units. Highlight the desired selection and
press
Enter again. Select Save to return to the Survey Menu.
10. From the
Survey Menu, select Receiver ID. Change the ID if the current entry is not
the desired one.
With
Receiver ID highlighted, press ENTER to bring up the Receiver ID screen,
Figure 3.64.
Figure 3.63 Unit of Measure Screen