106 Promark2 User’s Guide
Note: The Elapsed field is replaced by the Remain field during a point
initialization. The Remain field will begin to count down. When the Remain
field reaches 00:00:00, Stop is highlighted, data collection is stopped, and the
site ID is automatically incremented. Transfer the antenna from the
initializer bar to the range pole.
16. Stop is highlighted. Stop the data collection session by pressing ENTER.
17. Turn off the receiver when finished.
When you have collected the desired data, simply turn off the receiver to end the
session.
Note: To avoid possible damage to the external antenna connector, unplug
the external antenna cable from the receiver prior to removing the receiver
from the cradle.
Follow the steps presented above to complete your survey. After data collection is complete,
take all GPS receivers used in the survey to the office and download the data to an office
computer. The data is now ready for processing in Ashtech Solutions.
