A SERVICE OF

logo

5. AIS Operation
5-9
5.8 How to Display Target Data
You can display an AIS target’s data by selecting it on the display.
5.8.1 Basic data
From the control unit w/keyboard
1. Use the trackball to put the cursor on the AIS target symbol you want to know its data.
2. Press the TARGET DATA key.
By trackball
Use the trackball to put the cursor on an AIS target symbol then push the scrollwheel. The selected target is marked
with a broken square and AIS data is shown in the AIS data box when the target is correctly selected.
Activated target selected for data display
AIS data display
Note 1: AIS is switched off in dead reckoning.
Note 2: The indication "Query" appears when receiving only dynamic data: "Tracking" appears after receiving static
data.