Filter
Top Products
03 Your driving environment
76
Windows, rearview and door mirrors
03
Operating
Operating the power windows
Operating without auto
Operating with auto
All power windows can be operated using
the control panel in the driver’s door. Each
control panel in the other doors can only con-
trol its own respective power window. The
power windows can only be controlled with
one control panel at a time.
In order that the power windows can be used
the car must be in ignition position I or II. Af-
ter the car has been running the power win-
dows can be operated for several minutes
even when the remote control key has been
removed, but not however after the door has
been opened.
Closing of the windows is stopped and the
window is opened if anything prevents its
movement. It is possible to force the pinch
protection when closing has been interrupt-
ed, e.g. with ice, by continuously holding the
button up until the window is closed. The
pinch protection is reactivated after a brief
pause.
Operating without auto
Move one of the controls up/down gently.
The power windows move up/down as long
as the control is held in position.
Operating with auto
Move one of the controls up/down to the end
position and release it. The window runs au-
tomatically to its end position.
Remote control and central locking but-
tons
All side windows can be opened/closed au-
tomatically with the remote control or the
central locking buttons:
Press and hold the lock button until the win-
dows start to open/close. To interrupt open-
ing/closing, press the lock button again.
Resetting
If the battery is disconnected then the func-
tion for automatic opening must be reset so
that it can work correctly.
1. Gently raise the front section of the button
to raise the window to its end position and
hold it there for one second.
2. Release the button briefly.
3. Raise the front section of the button
again for one second.
3603813s
1
1
2
2
WARNING
Resetting must be carried out to ensure that
pinch protection works.