Filter
Top Products
03 Your driving environment
61
Seats
03
Preparations
The seats can be adjusted for a certain time
after unlocking the door with the remote con-
trol key without the key in the ignition switch.
Seat adjustment is normally made when the
ignition is on and can always be made when
the engine is running.
Seat with memory function*
Store setting
1. Adjust the seat and the door mirrors.
2. Press and hold the button, while
depressing the , or button.
Using a stored setting
Press one of the memory buttons –
until the seat and the door mirrors stop. If you
release the button then the movement of the
seat will stop.
Key memory* in remote control key
The positions of the driver’s seat and the
door mirrors are stored in the key memory
when the car is locked with the remote con-
trol key.
When the car is unlocked with the same re-
mote control and the driver’s door is opened
the driver’s seat and also the door mirrors
automatically adopt the positions stored in
the key memory.
It is also possible to use the key memory by
pressing the unlock button on the remote
control key when the driver’s door is open.
The key memory can be activated/deactivat-
ed under
Car key memory Seat & mirror
positions
. For a description of the menu sys-
tem, see page 94.
8505312s
1 2 3 4
NOTE
The seat and the door mirrors do not move
if they are already in the relevant position.
G014387
NOTE
The key memory in the two remote controls
and the seat memory are completely inde-
pendent of each other.