Filter
Top Products
04 Comfort and driving pleasure
132
Blind Spot Information System, BLIS*
04
General
BLIS camera
Indicator lamp
BLIS symbol
BLIS is an information system based on dig-
ital camera technology that under certain
conditions can help to draw the driver’s at-
tention to vehicles moving in the same direc-
tion as the host vehicle in the so-called "blind
spot".
The system is designed to work most effec-
tively when driving in dense traffic on multi-
lane highways.
When a camera has detected a vehicle in-
side the blind spot zone the indicator
lamp illuminates with a constant glow.
BLIS advises the driver with a message if a
fault arises in the system. If for example the
system’s cameras are obscured then the
BLIS indicator lamp flashes and a message is
shown in the information display. In such
cases, check and clean the lenses. If neces-
sary, the system can be switched off tempo-
rarily by pressing the BLIS button, see
page 133.
"Blind spots" covered by BLIS cameras.
A = approx. 9.5 m and B = approx. 3 m
Cleaning
In order to work most effectively the BLIS
camera lenses must be clean. The lenses can
be cleaned with a soft cloth or damp sponge.
Clean the lenses carefully so that they are not
scratched.
WARNING
The system is a supplement to, not a re-
placement for, a safe driving style and use
of the rearview mirrors. It can never replace
the driver’s attention and responsibility. The
responsibility for changing lanes safely al-
ways rests with the driver.
8401361s
NOTE
The lamp illuminates on the side of the car
where the system has detected the vehicle.
If the car is overtaken on both sides at the
same time then both lamps illuminate.
IMPORTANT
The lenses are electrically heated to melt ice
or snow. If necessary, brush snow away
from the lenses.
3603842s
A
B