Filter
Top Products
02 Locks and alarm
39
Remote control key/key
02
Replacing the remote control key
battery
Battery type: CR2430, 3 V (one in remote
control key and two in the PCC).
Opening
Slide the spring-loaded catch to the
side while pulling the key blade straight
out backwards .
Insert a screwdriver in the hole behind
the spring-loaded catch and gently prise
the remote control key up.
Battery replacement
Closely study how the battery/batteries
are secured on the inside of the cover,
with regard to their (+) and (–) sides.
Remote control key
Carefully prise out the battery. Install a
new one with the (+) side down.
PCC
Carefully prise out the batteries. First
install one new one with the (+ ) side up.
Position the white plastic tab in between
and finally install a second new battery
with the (+) side down.
Assembly
1. Press the remote control key together.
2. Hold the remote control key with the
slot pointed up and lower the key blade
into its slot.
3. Lightly press the key blade. You should
hear a "click" when the key blade is
locked in.
1
3603816s
1
2
2
3603817s
3
NOTE
Turn the remote control key over with the
buttons facing up, this is to avoid the batter-
ies falling out when it is opened.
IMPORTANT
Avoid touching the battery and its terminals
with your fingers, as this could damage their
functionality.
G015518
IMPORTANT
Dispose of old batteries in an environmen-
tally responsible manner.