Filter
Top Products
02 Locks and alarm
47
Alarm*
02
Temporary disarming of the alarm
Deactivation of the detectors
To prevent the alarm being triggered errone-
ously, such as during a ferry journey, the
movement and tilt detectors can be tempo-
rarily disengaged.
Press the button for disengagement. Disen-
gagement is only possible within one minute
after the engine has stopped. The light in the
button remains on until the car is locked.
A message remains on the display for
10 seconds or until the car is locked.
The detectors are reactivated the next time
the car is started.
If the car is equipped with deadlocks then
this is engaged at the same time, see
page 44.
Testing the alarm system
Testing the movement detector in the
passenger compartment
1. Close all windows. Remain in the car.
2. Arm the alarm, see page 45.
3. Wait 15 seconds.
4. Trigger the alarm by moving your arms
forward and back at backrest height. A
siren sounds and all direction indicators
flash.
5. Deactivate the alarm by unlocking the
car with the remote control key.
Testing the alarm sensors in the doors
1. Arm the alarm, see page 45.
2. Wait 15 seconds.
3. Unlock the driver’s door using the key
blade.
4. Open the driver’s door. A siren sounds
and all direction indicators flash.
5. Deactivate the alarm by unlocking the
car with the remote control key.
Testing the alarm sensors in the bonnet
1. Sit in the car and deactivate the alarm, see
page 46.
2. Arm the alarm, see page 45. Remain in
the car and lock the doors with the
button on the remote control key.
3. Wait 15 seconds.
4. Open the bonnet with the handle under
the dashboard. A siren sounds and all
direction indicators flash.
5. Deactivate the alarm by unlocking the
car with the remote control key.
3905611s