Filter
Top Products
06 Maintenance and specifications
179
Lamps
06
Extra main beam Active Bi-Xenon and
Bi-Xenon*
1. Detach the headlamp.
2. Remove the cover.
3. Detach the bulb by pressing the holder
downwards.
4. Unplug the connector from the bulb.
5. Fit the new bulb in the socket and snap
it in. It can only be secured in one
position.
Reinstall the parts in reverse order.
Position/parking lamps
1. Detach the headlamp.
2. Remove the cover, see page 178.
3. For better access, detach the main
beam bulb first.
4. Pull the cable in order to withdraw the
bulb holder.
5. Remove the blown bulb and fit a new
one. It can only be secured in one
position.
6. Fit the bulb holder in the socket and
press until a clicking sound is heard.
Reinstall the parts in reverse order.
Direction indicators/flashers
1. Detach the headlamp.
2. Remove the small round cover.
3. Pull the bulb holder in order to extract
the bulb.
4. Remove the blown bulb and fit a new
one. It can only be installed in one way.
5. Fit the bulb holder in the socket and
press until a clicking sound is heard.
6. Refit the cover. It must be fitted and
pressed in until a clicking sound is
heard.
Reinstall the parts in reverse order.
3501897s
3501879s
3501872s