Filter
Top Products
30
TM
Setting Up Speed Alerts
The device can sound an alert if you exceed a given speed
for a designated amount of time. You can activate alerts if
you exceed a particular road’s speed limit or if you exceed
an overall maximum speed. Follow the steps below to set
up alerts:
From the Menu screen, select Settings.
On the Settings screen, select System Setup and then
Speed Calibration. This opens the Speed Calibration
screen:
Use the left and right arrow keys to set the default speed
for each type of road. The speeds are set in increments of
5 MPH.
Tap the Back arrow twice to go back to the Settings
screen.
To activate an alert when you exceed an overal maximum
speed, select Alerts Setup and then Max Speed Alert.
This opens the Max Speed Alert Screen:
1.
2.
3.
4.
5.
Use the left and right arrows to set the overall maximum
speed limit in 5 MPH increments.
Use the left and right arrows to set the duration (the
number of seconds you can exceed the maximum speed)
before the device sounds the alert; set the duration in 5-
second increments.
Select On to activate the Max Speed Alert, and then tap
the Back arrow to return to Alerts Setup screen.
To activate an alert when you exceed the speed limits on
the Speed Calibration screen, select Auto Speed Alert:
Use the left and right arrows to set the speed threshold
(how many miles per hour you can drive above the speed
limit) and the duration. Select On to activate the Max
Speed Alert, and then tap the Back arrow to return to
Alerts Setup screen.
6.
7.
8.
9.