Toyota SXV10 Automobile User Manual


 
202
ELECTRONIC CONTROLLED TRANSMISSION AND A/T INDICATOR (1MZ–FE)
E 7(B), E 8 (C), E10(A) ENGINE CONTROL MODULE (ENGINE AND ELECTRONIC CONTROLLED TRANSMISSION ECU)
(TURN ON THE IGNTION SW)
S1, S2– E1 : 9.0–14.0 VOLTS WITH SOLENOID ON
0–1.5 VOLTS WITH SOLENOID OFF
P– E1 : 7.5–14.0 VOLTS WITH IGNITION SW ON AND PATTERN SELECT SW AT POWER POSITION
L– E1 : 7.5–14.0 VOLTS WITH SHIFT LEVER AT L POSITION
2– E1 : 7.5–14.0 VOLTS WITH SHIFT LEVER AT 2 POSITION
R– E1 : 7.5–14.0 VOLTS WITH SHIFT LEVER AT R POSITION
STP– E1 : 9.0–14.0 VOLTS WITH BRAKE PEDAL DEPRESSED
THW– E2 : 0.2–1.0 VOLTS WITH WITH ENGINE COOLANT TEMP. 60°C (140°F) –120°C (248°F)
IDL– E2 : 0–1.5 VOLTS WITH THROTTLE VALVE FULLY CLOSED
9.0–14.0 VOLTS WITH THROTTLE VALVE FULLY OPENED
VTA–E2 : 0.3–0.8 VOLTS WITH THROTTLE VALVE FULLY CLOSED
3.2–4.9 VOLTS WITH THROTTLE VALVE FULLY OPENED
VC– E2 : 4.5–5.5 VOLTS WITH IGNITION SW AT ON POSITION
OD1– E1 : 4.5–5.5 VOLTS WITH IGNITION SW AT ON POSITION
OD2– E1 : 9.0–14.0 VOLTS WITH O/D MAIN SW TURNED OFF
0–3.0 VOLTS WITH O/D MAIN SW TURNED ON
IGSW– E1 : 9.0–14.0 VOLTS WITH IGNITION SW AT ON POSITION
+B– E1 : 9.0–14.0 VOLTS WITH IGNITION SW AT ON POSITION
+B1– E1 : 9.0–14.0 VOLTS WITH IGNITION SW AT ON POSITION
E 2
ELECTRONIC CONTROLLED TRANSMISSION SOLENOID
1, 2, 6–GROUND : EACH 11–15
O 5
O/D MAIN SW
1–3 : CLOSED WITH O/D MAIN SW OFF, OPEN WITH O/D MAIN SW ON
: PARTS LOCATION
CODE SEE PAGE CODE SEE PAGE CODE SEE PAGE
C 8 32 E 9 C 32 O 5 33
C11 32 E10 D 32 O 6 29
D 1 28 J 1 33 P 1 29
E 2 28 J 2 33 S10 33
E 4 28 J 3 33 T 1 29
E 6 32 J 7 33 V 5 29
E 7 A 32 N 2 A 33
E 8 B 32 N 3 B 33
: JUNCTION BLOCK AND WIRE HARNESS CONNECTOR
CODE SEE PAGE JUNCTION BLOCK AND WIRE HARNESS (CONNECTOR LOCATION)
1A
1D
20
COWL WIRE AND J/B NO 1 (INSTRUMENT PANEL LEFT)
1K
20 COWL WIRE AND J/B NO. 1 (INSTRUMENT PANEL LEFT)
1M
2B 22 ENGINE ROOM MAIN WIRE AND J/B NO. 2 (ENGINE COMPARTMENT LEFT)
2C
22
ENGINE WIRE AND J/B NO 2 (ENGINE COMPARTMENT LEFT)
2D
22 ENGINE WIRE AND J/B NO. 2 (ENGINE COMPARTMENT LEFT)
3B
3C
24 COWL WIRE AND J/B NO. 3 (BEHIND COMBINATION METER)
3D
24
COWL
WIRE
AND
J/B
NO.
3
(BEHIND
COMBINATION
METER)
: CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS
CODE SEE PAGE JOINING WIRE HARNESS AND WIRE HARNESS (CONNECTOR LOCATION)
II1 42 COWL WIRE AND INSTRUMENT PANEL WIRE
II2 42 INSTRUMENT PANEL WIRE AND COWL WIRE
IN1 42 INSTRUMENT PANEL WIRE AND SWITCH WIRE
IP1
44
ENGINE WIRE AND COWL WIRE
IP3
44 ENGINE WIRE AND COWL WIRE
IQ1 44 ENGINE WIRE AND INSTRUMENT PANEL WIRE
: GROUND POINTS
CODE SEE PAGE GROUND POINTS LOCATION
EB 38 (1MZ–FE) FRONT LEFT FENDER
ED 38 (1MZ–FE) INTAKE MANIFOLD LH
IF 42 LEFT KICK PANEL
SERVICE HINTS