Filter
Top Products
Figure 4-20 Removing the memory module
1
1
1
1
1. Latches
Product appearance depends on the model you purchased.
Never allow metal objects, such as screws, staples and paper clips, to
enter the computer. Foreign metal objects can create a short circuit,
which can cause computer damage and fire, possibly resulting in
serious injury.
Do not touch the connectors on the memory module or on the
computer. Debris on the connectors may cause memory access
problems.
Do not touch any objects other than the memory module, memory slot
and memory module cover.
Align the grooves along the edges of the memory module with the
locking tabs on the connector and insert the module into the connector
firmly - if you find it difficult to install the memory module, gently prise
the locking tabs outwards using the tip of your finger.
Please also ensure that you hold the memory module along its left and
right hand edges - the edges with the grooves in.
12. Seat the memory module cover in place and secure it with the screw.
Take care to ensure that the memory module cover is firmly closed.
13. Insert the tabs on the bottom of the keyboard into the corresponding
notches on the computer and engage the latches.
Check to ensure the keyboard ribbon cables are connected to the
computer when seating the keyboard. If the keyboard ribbon cables were
pulled out, please contact TOSHIBA support for assistance.
14. Set the keyboard brace into its groove and hold down to secure the
latches.
User's Manual
4-43