Filter
Top Products
Figure 4-19 Installing the memory module
3
2
1
1
1. Notch 3. Slot D
2. Slot C
Product appearance depends on the model you purchased.
Never allow metal objects, such as screws, staples and paper clips, to
enter the computer. Foreign metal objects can create a short circuit,
which can cause computer damage and fire, possibly resulting in
serious injury.
Do not touch the connectors on the memory module or on the
computer. Debris on the connectors may cause memory access
problems.
Do not touch any objects other than the memory module, memory slot
and memory module cover.
Align the grooves along the edges of the memory module with the
locking tabs on the connector and insert the module into the connector
firmly - if you find it difficult to install the memory module, gently prise
the locking tabs outwards using the tip of your finger.
Please also ensure that you hold the memory module along its left and
right edges - the edges with the grooves in.
Remove procedure: Push the latches away from the module in order
to release it - a spring will force one end of the module up at an angle.
And then grasp the module by its edges and remove it from the
computer.
User's Manual
4-42