Filter
Top Products
Chapter 4 HART Communications Series 220/221 Instruction Manual
Sequence Description Access Notes
1,4,3,1,3,1 4 mA View Loop test, fix analog output at 4 mA
1,4,3,1,3,2 20 mA View Loop test, fix analog output at 20 mA
1,4,3,1,3,3 Other Edit Loop test, fix analog output at mA value entered
1,4,3,1,3,4 End Exit loop test
1,4,3,1,4 D/A trim Edit Calibrate electronics 4mA and 20mAvalues
1,4,3,1,5 Scaled D/A trim N/A Not used
1,4,3,2,1 Poll addr Edit Poll address
1,4,3,2,2 Num req. preams View Number of required preambles
1,4,3,2,3 Burst mode N/A Not used
1,4,3,2,4 Burst option N/A Not used
1,4,4,1 Distributor N/A Not used
1,4,4,2 Model N/A Not used
1,4,4,3 Dev id View Device identification
1,4,4,4 Tag Edit Tag
1,4,4,5 Date Edit Date
1,4,4,6 Write Protect View Write protect
1,4,4,7 Descriptor Edit Vortex flowmeter
1,4,4,8 Message Edit 32 character alphanumeric message
1,4,4,9 PV snsr s/n View Primary variable sensor serial number
1,4,4,menu Final assy # Edit Final assembly number
1,4,4,menu,1 Universal Rev View Universal revision
1,4,4,menu,2 Fld dev Rev View Field device revision
1,4,4,menu,3 Software Rev View Software revision
1,5 Review N/A Not used
2 PV View Primary variable value
3 PV AO View Analog output, mA
4,1 PV LRV Edit Primary variable lower range value
4,2 PV URV Edit Primary variable upper range value
5,1 PV LRV Edit Primary variable lower range value
5,2 PV URV Edit Primary variable upper range value
4-4 IM-22