Filter
Top Products
Remote Keyless Entry
(RKE) System Operation
The Remote Keyless Entry (RKE)
transmitter functions work up
to 195 feet (60 m) away from the
vehicle.
There are other conditions which
can affect the performance of
the transmitter. See Remote Keyless
Entry (RKE) System on page 2-3.
/ (Remote Vehicle Start):
For vehicles with this feature,
see Remote Vehicle Start on
page 2-6 for additional information.
Q (Lock): Press to lock all
the doors.
If enabled through the Driver
Information Center (DIC), the
parking lamps flash once to indicate
locking has occurred. If enabled
through the DIC, the horn sounds
when
Q is pressed again within
five seconds. See DIC Vehicle
Customization (With DIC Buttons)
on page 3-65 for additional
information.
Pressing Q may arm the content
theft-deterrent system. See Content
Theft-Deterrent on page 2-16.
K (Unlock): Press once to unlock
only the driver door. If
K is
pressed again within five seconds,
all remaining doors unlock.
The interior lamps come on and
stay on for 20 seconds or until the
ignition is turned on.
If enabled through the DIC, the
parking lamps flash twice to indicate
unlocking has occurred. See DIC
Vehicle Customization (With DIC
Buttons) on page 3-65.
Pressing
K on the RKE transmitter
disarms the content theft-deterrent
system. See Content Theft-Deterrent
on page 2-16.
& (Power Liftgate): Press and
hold for about one second to open
and close the liftgate. The taillamps
flash and a chime sounds to indicate
when the liftgate is opening and
closing.
L (Vehicle Locator/Panic Alarm):
Press and release to locate the
vehicle. The parking lamps flash
and the horn sounds three times.
With Remote Start and Liftgate
(Without Remote Start or
Liftgate Similar)
2-4 Features and Controls