Filter
Top Products
Using Cruise Control on Hills
How well the cruise control will work
on hills depends upon the vehicle
speed, load, and the steepness of
the hills. When going up steep hills,
you might have to step on the
accelerator pedal to maintain the
vehicle speed. When going downhill,
you might have to brake or shift to a
lower gear to keep the vehicle speed
down. When the brakes are applied
the cruise control is disengaged.
Ending Cruise Control
There are three ways to end cruise
control:
• Step lightly on the brake pedal.
• Press the [ button.
• Press the T button.
Erasing Speed Memory
The cruise control set speed
memory is erased when the cruise
control or the ignition is turned off.
Exterior Lamps
The exterior lamps control is located
on the instrument panel to the left
of the steering wheel.
It controls the following systems:
• Headlamps
• Taillamps
• Parking Lamps
• License Plate Lamps
• Instrument Panel Lights
• Fog Lamps (If Equipped)
The exterior lamps control has four
positions:
O (Off): Turns the automatic light
control on or off.
AUTO (Automatic): Automatically
turns on the headlamps at normal
brightness, together with the
following:
• Parking Lamps
• Taillamps
• License Plate Lamps
• Instrument Panel Lights
; (Parking Lamps): Turns on the
parking lamps together with the
following:
• Taillamps
• License Plate Lamps
• Instrument Panel Lights
Instrument Panel 3-11