Filter
Top Products
Remote Keyless Entry
(RKE) System Operation
c (Lock): Press to lock the doors,
liftgate and fuel tank door.
If the driver door is open, the doors
will not lock.
d (Unlock): Press to unlock the
doors, liftgate and fuel tank door.
Press and hold
d to lower all
the windows.
Matching Transmitter(s) to
Your Vehicle
Each RKE transmitter is uniquely
coded to prevent another transmitter
from unlocking the vehicle. If a
transmitter is lost or stolen, a
replacement can be purchased
through your dealer/retailer. All
transmitters need to be re-coded to
match the new transmitter. The lost
transmitter will no longer work after
the new transmitters are re-coded.
The vehicle can have a maximum of
five transmitters coded to it.
Battery Replacement
Replace the battery if the Remote
Control Battery check message
appears in the DIC. See “Remote
Control Battery Check” under DIC
Warnings and Messages (Base and
Uplevel Systems) on page 4-37.
Notice: When replacing the
battery, do not touch any of
the circuitry on the transmitter.
Static from your body could
damage the transmitter.
To replace the battery:
1. Extend the key. See Keys
on page 2-2 for additional
information.
2. Open the RKE transmitter.
3. Remove the old battery. Do not
use a metal object.
4. Insert the new battery, positive
side facing up. Replace with a
CR2032 or equivalent battery.
5. Close the RKE transmitter.
Synchronization
After changing the battery, turn the
ignition to ON/RUN. This will
synchronize the key.
2-4 Keys, Doors and Windows