Filter
Top Products
The Ignition Logic is preset to turn
off the audio system when the
ignition is turned off. To enable or
disable Ignition Logic:
1. Press SETTINGS until Audio
displays.
2. Press
\ until System displays.
3. Press OK until Ign. Logic
ON or Ign. Logic OFF displays.
4. Press
\ or ] to select the
setting. The setting is saved
automatically.
• Press SETTINGS again to
move back one level in
the menu.
• Press FM/AM, CD/MP3, or
BC to turn on that feature.
Audio displays and the system
starts to play if SETTINGS, FM/AM,
CD/MP3, or BC is not pressed
within five seconds after the setting
is saved.
System Display
The following information shows on
the system display:
• FM or AM, and the current
station frequency if the radio is
active.
• The station name displays if RDS
is activated.
• AS displays if the AS level is
activated.
• CD displays, and the CD title
number or the CD title name
if the CD player is active.
• MP3 displays if the CD is an
MP3 CD.
• RDM displays if the CD is being
played in random mode.
The most recent selected audio
source plays when the audio system
is turned on and the display is lit.
The outside temperature, time,
and date display when the audio
system is turned off and the ignition
is ON/RUN, see Driver Information
Center (DIC) on page 4-26.
Audio Settings
The audio settings can be set
for each audio source and are
stored separately for each radio
station and the CD player.
Adjusting the Tone (Bass/Treble)
To adjust the Bass:
1. Press SOUND until Bass
appears.
2. Press
\ or ] to adjust the level
from -12 through +12. The
setting is saved automatically.
• Press SETTINGS again to go
back one level in the menu.
• Press FM/AM, CD/MP3, or BC to
display that function.
Infotainment 6-3