Replacing Safety Belt
System Parts After
a Crash
{ CAUTION
A crash can damage the safety
belt system in the vehicle.
A damaged safety belt system
may not properly protect the
person using it, resulting in
serious injury or even death
in a crash. To help make sure
the safety belt systems are
working properly after a crash,
have them inspected and any
necessary replacements made
as soon as possible.
After a minor crash, replacement of
safety belts may not be necessary.
But the safety belt assemblies that
were used during any crash may
have been stressed or damaged.
See your dealer/retailer to have the
safety belt assemblies inspected or
replaced.
New parts and repairs may be
necessary even if the safety belt
system was not being used at
the time of the crash.
Have the safety belt pretensioners
checked if the vehicle has been in a
crash, or if the airbag readiness light
stays on after you start the vehicle or
while you are driving. See Airbag
Readiness Light on page 4-14.
Airbag System
Your vehicle has the following
airbags:
• A frontal airbag for the driver.
• A frontal airbag for the right front
passenger.
• A seat-mounted side impact
airbag for the driver.
• A seat-mounted side impact
airbag for the right front
passenger.
• A roof-rail airbag for the driver
and the passenger seated
directly behind the driver.
• A roof-rail airbag for the
right front passenger and the
passenger seated directly behind
the right front passenger.
All of the airbags in your vehicle will
have the word AIRBAG embossed in
the trim or on an attached label near
the deployment opening.
Seats and Restraints 1-23