Filter
Top Products
4. Pull the rest of the shoulder belt
all the way out of the retractor to
set the lock.
5. To tighten the belt, push down
on the child restraint, pull the
shoulder portion of the belt to
tighten the lap portion of the belt,
and feed the shoulder belt back
into the retractor. If you are using
a forward-facing child restraint,
you may find it helpful to use your
knee to push down on the child
restraint as you tighten the belt.
6. If your child restraint has a top
tether, follow the child restraint
manufacturer’s instructions
regarding the use of the top
tether. See Lower Anchors and
Tethers for Children (LATCH) on
page 1-45 for more information.
7. Push and pull the child restraint
in different directions to be sure
it is secure.
To remove the child restraint,
unbuckle the vehicle’s safety belt
and let it go back all the way.
If the top tether is attached to
a top tether anchor, disconnect it.
1-52 Seats and Restraints