Filter
Top Products
8
CAUTIONS FOR CONNECTION
• Before connecting, disconnect the negative battery terminal. Connect the negative
battery terminal after all other connections are completed.
• Connection terminals and cables are differentiated by color. Make connections to the
same colors. Make sure connectors are securely inserted until a click sound is heard.
Incomplete connection may cause a distorted picture or operation errors.
• Before disconnecting the connector, turn the ignition switch to the off position.
Otherwise, it may cause a malfunction. When disconnecting the connector, hold the
connector itself to remove it while pressing the connector lock. If the cable is pulled, it
may come off, causing a malfunction.
• Do not splice the power supply cable to connect it to the power source of other
devices. A fire or electrocution could occur due to excess current flow on the power
cable.
• Always connect the red lead wire of the power supply cable to the accessory (ACC)
power supply.
* Do not connect this Rear View Back up Camera to the power supply for the camera,
which some navigation systems are equipped with.
• Connect the brown lead wire to the signal line which switches from 0 V to 12 V when
the shift lever is shifted to R (reverse).
• If a small plug socket input monitor is used, a commercially-available adapter is
required to convert it to a pin plug. The adapter can be purchased at an electric
appliance shop.
CAUTION