Filter
Top Products
3
• When installing this Rear View Back up Camera System to a vehicle equipped with air bags
(The name differs depending on the manufacturer, such as SRS dual air bag, SRS side air bag,
SRS curtain air bag), do not install this Rear View Back up Camera System or route its wiring
where it affects operation of the air bag system. If the air bags do not operate properly in an
emergency, an accident or injury can occur. (Consult the dealer where the product was
purchased to determine the installation position, keeping safety in mind.)
• Do not use any cables other than ones provided with this Rear View Back up Camera System.
Do not modify the cables.
• If installing this Rear View Back up Camera System or connecting the ground using the vehicle
nuts and bolts, never use nuts and bolts from critical parts of the vehicle such as the steering
wheel, brake system, and fuel tank. Vehicle control may become inoperative, or a fire could occur.
• When drilling holes into the vehicle body to install this Rear View Back up Camera System, check
the locations of pipes, tanks, and electrical wiring so that this Rear View Back up Camera System
will not interfere with them. Otherwise, a fire or other malfunction could occur.
• Be sure to bundle cables so that they do not obstruct driving. Loose cables which become
entangled in the steering wheel, shift selector lever, or brake pedal may cause an accident.
• Do not splice the cable to connect the power supply to other devices.
• After completing the installation and wiring, make sure the brake lights, lights, horn, turn signals,
wipers, and other electrical components operate properly. Otherwise, an accident could occur.
• Do not disassemble or modify the Rear View Back up Camera System. Disassembly prohibited.
It could result in an accident, fire, or electrocution.If foreign material has penetrated the Rear View
Back up Camera System or liquid has spilled onto it, which may produce smoke, foul odor, or
abnormal noise, discontinue use immediately and always consult the dealer where the Rear View
Back up Camera System was purchased. If the Rear View Back up Camera System continues to
be used, it could result in an accident, fire, or electrocution.
• If power to the power cable has been cut or a fuse has blown, verify that the cable has not been
shorted, and replace any blown fuses with a new fuse of the same current rating. (Ampere is
displayed on the fuse.) If a non-specified fuse is used, a fire or malfunction could occur.
• Be sure to route wiring so that it does not come into contact with heated parts. Otherwise, the wire
covering will melt and cause a short, resulting in a fire or electrocution.
• Do not use this Rear View Back up Camera System if it appears damaged such as when there is
no display or sound output. Otherwise, it could result in an accident, fire, or electrocution.
• Do not touch this Rear View Back up Camera System during extreme weather conditions such as
thunder and lightning. Otherwise, it could result in electrocution.
CAUTION
• Installation and wiring requires technical expertise/experience. To ensure safety, consult the dealer
where the Rear View Back up Camera System was purchased.
• Be sure to use the Rear View Back up Camera System in the specified manner. If a non-specified
part is used, the internal parts of the Rear View Back up Camera System can be damaged or
detach because of improper attachment, resulting in an accident.
• Do not install the ECU box to a location where rain, moisture, or dust can penetrate. If water,
moisture, or dust penetrates the ECU box, it may cause fire or smoke.
• Do not install the ECU box where heat is retained such as under a carpet. Heat from the ECU box
cannot be dissipated, causing a fire, malfunction, or deterioration.
• Wire the cable so that it does not touch any metallic areas. The cable could be damaged from
contact, causing a fire or electrocution.