Filter
Top Products
14
7. Install the control switch in a position where it is
easy to operate.
Peel off the paper backing on the back of the control
switch and attach it to a suitable position.
How to use self-lock conductor
1. Insert the reverse signal cable of the vehicle into the
self-lock conductor.
2. Fold the self-lock conductor and lock the reverse
signal cable.
3. Insert the reverse signal pick-up cable (Brown)
included with the system into the self-lock
conductor.
*Insert the cable until it stops.
4. Close the self-lock cover and firmly lock it by
pinching it with pliers.
• Do not install the control switch in a
position that obstructs vehicle operation.
CAUTION
Vehicle reverse signal cable
Cable stopper
Reverse signal pick-up
cable included with
system (Brown)
Control switch
Need help? Call
1-800-421-5013